Feeding Systems

NDE VERTICAL TMR MIXERS

New Direction Equipment 1402 Side Door Vertical TMR Mixer If you are looking for a vertical feed mixer that will easily feed up to 100 head and do it as economical as possible, the NDE 1402 is the mixer for you. Height: 100.00 in. Width: 99.00 in. Length: 192.00 in. Door Width: 43.00 in. Weight (empty): 6430 lbs Capacity: 350.00 cubic ft Capacity w/ Extension: 405.00 cubic ft PTO Speed: 540 RPM Minimum Power: 75 HP-85 HP No. of Knives / Available: 5/5 No. of Tires: 2 New Direction Equipment 1502 Side Door Vertical TMR Mixer The NDE 1502 is one of the staples of the NDE vertical feed mixer line! This mixer is built with the basic 8 foot tub. It is still the same basic tub design that the first NDE model 500 mixer was built with in 1998. It is supplied with a 540 rpm, PTO or with an optional 1000 rpm, PTO. With it's 495 Cu. Ft. tub (w/ rubber top kit) this mixer will easily feed up to 200 head or more. It is an excellent choice for beef or dairy operations that need to combine performance with value. Great for round bales up to 5x5. For 5x6 bales please consider the 1652. Height: 102.00 in. Width: 105.00 in. Length: 194.00 in. Door Width: 43.00 in. Weight (empty): 7190 lbs Capacity: 420.00 cubic ft Capacity w/ Extension: 495.00 cubic ft PTO Speed: 540 RPM MInimum Power: 85 HP-100 HP No. of Knives / Available: 5/9 No. of Tires: 2 New Direction Equipment 1552 Side Door Vertical TMR Mixer The NDE 1552 vertical feed mixer is the exact same mixer as the 1652 except it has a 12" lower height. With a height of 100" this mixer was designed for dairy producer that prefer to load with a skid steer or situations where overhead clearance is an issue. Height: 100.00 in. Width: 112.00 in. Length: 196.00 in. Door Width: 43.00 in. Weight (empty): 7730 lbs Capacity: 435.00 cubic ft Capacity w/ Extension: 520.00 cubic ft PTO Speed: 1000 RPM MInimum Power: 100 HP-120 HP No. of Knives / Available: 5/9 No. of Tires: 2 New Direction Equipment 1652 Side Door Vertical TMR Mixer The NDE 1652 in one of our most popular vertical feed mixers. With it's 610 cu. ft. tub, (with rubber top kit) this mixer is an excellent choice if you are looking for a mixer that will handle 5 x 6 round bales and still have plenty of room for silage or other by-products. This side door mixer is available with conveyor lengths from 3 ft. to 9 ft. on either RH or LH side. Height: 112.00 in. Width: 112.00 in. Length: 196.00 in. Door Width: 43.00 in. Weight (empty): 8080 lbs Capacity: 530.00 cubic ft Capacity w/ Extension: 610.00 cubic ft PTO Speed: 1000 RPM MInimum Power: 100 HP-120 HP No. of Knives / Available: 5/9 No. of Tires: 2 New Direction Equipment 554 Front-Door Vertical TMR Mixer These units are supplied with four tires mounted on our lateral pivot axle system. All basic front door mixers are supplied with a 58” front door and two way flat conveyor. 36” & 54” side conveyors are optional. RH, LH and rear doors are also available. Height: 101.00 in. Width: 102.00 in. Length: 222.00 in. Door Width: 58.00 in. Weight (empty): 9140 lbs Capacity: 435.00 cubic ft Capacity w/ Extension: 530.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 100 HP-120 HP No. of Knives / Available: 5/9 No. of Tires: 4 New Direction Equipment 654 Front-Door Vertical TMR Mixer These units are supplied with four tires mounted on our lateral pivot axle system. All basic front door mixers are supplied with a 58” front door and two way flat conveyor. 36” & 54” side conveyors are optional. RH, LH and rear doors are also available. Height: 113.00 in. Width: 102.00 in. Length: 222.00 in. Door Width: 58.00 in. Weight (empty): 9490 lbs Capacity: 530.00 cubic ft Capacity w/ Extension: 625.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 100 HP-120 HP No. of Knives / Available: 5/9 No. of Tires: 4 New Direction Equipment 704 Front-Door Vertical TMR Mixer These units are supplied with four tires mounted on our lateral pivot axle system. All basic front door mixers are supplied with a 58” front door and two way flat conveyor. 36” & 54” side conveyors are optional. RH, LH and rear doors are also available. Height: 104.00 in. Width: 109.00 in. Length: 230.00 in. Door Width: 58.00 in. Weight (empty): 10230 lbs Capacity: 512.00 cubic ft Capacity w/ Extension: 607.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 110 HP-130 HP No. of Knives / Available: 5/9 No. of Tires: 4 New Direction Equipment 804 Front-Door Vertical TMR Mixer These units are supplied with four tires mounted on our lateral pivot axle system. All basic front door mixers are supplied with a 58” front door and two way flat conveyor. 36” & 54” side conveyors are optional. RH, LH and rear doors are also available. Height: 116.00 in. Width: 109.00 in. Length: 230.00 in. Door Width: 58.00 in. Weight (empty): 10600 lbs Capacity: 620.00 cubic ft Capacity w/ Extension: 714.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 110 HP-130 HP No. of Knives / Available: 5/9 No. of Tires: 4 New Direction Equipment 2554 Dual Vertical TMR Mixer All NDE dual mixers are designed with the patented STEP FLOOR design for superior mixing action and clean out. Front door models include 58” wide door. LH, RH and rear doors are also available. Height: 99.00 in. Width: 106.00 in. Length: 310.00 in. Door Width: 58.00 in. Weight (empty): 17300 lbs Capacity: 675.00 cubic ft Capacity w/ Extension: 810.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 130 HP-150 HP No. of Knives / Available: 10/18 No. of Tires: 4 New Direction Equipment 2654 Dual Vertical TMR Mixer All NDE dual mixers are designed with the patented STEP FLOOR design for superior mixing action and clean out. Front door models include 58” wide door. LH, RH and rear doors are also available. Height: 111.00 in. Width: 106.00 in. Length: 310.00 in. Door Width: 58.00 in. Weight (empty): 17720 lbs Capacity: 825.00 cubic ft Capacity w/ Extension: 955.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 130 HP-150 HP No. of Knives / Available: 10/18 No. of Tires: 4 New Direction Equipment 2702 Dual Vertical TMR Mixer All NDE dual mixers are designed with the patented STEP FLOOR design for superior mixing action and clean out. Front door models include 58” wide door. LH, RH and rear doors are also available. Height: 111.00 in. Width: 109.00 in. Length: 329.00 in. Door Width: 58.00 in. Weight (empty): 20850 lbs Capacity: 800.00 cubic ft Capacity w/ Extension: 950.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 150 HP-170 HP No. of Knives / Available: 10/18 No. of Tires: 8 New Direction Equipment 2802 Dual Vertical TMR Mixer Amazing! That is the only way to describe the performance of the NDE dual vertical feed mixer with the patented Step Floor design! With the front floor 10 inches lower than the rear (8 inches on 2554 & 2654) and a 12 inch overlap of the auger pattern it is not hard to see why these mixers outmix, outcut and cleanout better than any other twin auger mixer ever built! By adopting this simple design we have created a "flow pattern" that is always moving the feed to the front of the mixer. This concept allows the auger to work together instead of competing with each other like conventional twin auger mixer. If you are still not convinced, just ask someone that owns one! All NDE dual mixers are designed with the patented STEP FLOOR design for superior mixing action and clean out. Front door models include 58” wide door. LH, RH and rear doors are also available. Height: 123.00 in. Width: 109.00 in. Length: 329.00 in. Door Width: 58.00 in. Weight (empty): 21370 lbs Capacity: 965.00 cubic ft Capacity w/ Extension: 1120.00 cubic ft PTO Speed: 1000 RPM Minimum Power: 150 HP-170 HP No. of Knives / Available: 10/18 No. of Tires: 8